|
|
|
SVD Readers (TIGER Readers)
The JMW Tiger Reader has been in manufactured since the early 1990's and is based on proven TIRIS technology. Over the years the JMW Tiger Reader has been continuously developed as customer requirements change and expand. The JMW Tiger Reader can be packaged to suit the full requirements of each site. The JMW Tiger Reader can be mounted easily within a 3U equipment rack or a Haldo pillar situated at the road side. Where the Tiger Reader is mounted within a 3U equipment rack, the reader is connected to a loop via a twin-axial cable. This twin-axial cable is normally placed in ducting or in some cases can be slot cut into the road surface. Where the Tiger Reader is mounted within a Haldo pillar, a choice is available for connecting back to the traffic signal controller. The link can be via the JMW Radio Modem, or a communications cable can be installed between the reader and traffic signal controller. When the JMW Tiger Reader is used in conjunction with the JMW Radio Modem, the reader can also be used to transmit other SCOOT related data, thereby saving on expensive civil works installing ducting. Each Tiger Reader has volt free output contacts and serial interfaces to allow a multiple of uses. Recognition Plate The Auditta Vehicle Recognition Plate is an easy and secure way to log vehicles or plant in and out of your depot. An electronic ring fence can be set up with an SMS warning message when items move outside this zone. Find out more about the Recognition Plate here... |
|
||||
|
